Tutorial: Adjusting for Publication Bias in JASP and R - Selection Models, PET-PEESE, and Robust Bayesian Meta-Analysis

František Bartoš, Maximilian Maier, Daniel S. Quintana & Eric-Jan Wagenmakers

2022

This R markdown file accompanies the tutorial Adjusting for publication bias in JASP and R: Selection models, PET-PEESE, and robust Bayesian meta-analysis published in Advances in Methods and Practices in Psychological Science (Bartoš, Maier, et al., 2022a).

The following R-markdown file illustrates how to:

See the full paper for additional details regarding the data set, methods, and interpretation.

Set-up

Before we start, we need to install JAGS (which is needed for installation of the RoBMA package) and the R packages that we use in the analysis. Specifically the RoBMA, weightr, and metafor R packages.

JAGS can be downloaded from the JAGS website. Subsequently, we install the R packages with the install.packages() function.

{r install.packages(c("RoBMA", "weightr", "metafor")) If you happen to use the new M1 Mac machines with Apple silicon, see this blogpost outlining how to install JAGS on M1. In short, you will have to install Intel version of R (Intel/x86-64) from CRAN, not the Arm64 (Apple silicon) version.

Once all of the packages are installed, we can load them into the workspace with the library() function.

library("metafor")
library("weightr")
library("RoBMA")

Lui (2015)

Lui (2015) studied how the acculturation mismatch (AM) that is the result of the contrast between the collectivist cultures of Asian and Latin immigrant groups and the individualist culture in the United States correlates with intergenerational cultural conflict (ICC). Lui (2015) meta-analyzed 18 independent studies correlating AM with ICC. A standard reanalysis indicates a significant effect of AM on increased ICC, r = 0.250, p < .001.

Data manipulation

First, we load the Lui2015.csv file into R with the read.csv() function and inspect the first six data entries with the head() function (the data set is also included in the package and can accessed via the data("Lui2015", package = "RoBMA") call).

df <- read.csv(file = "Lui2015.csv")
head(df)
#>      r   n                   study
#> 1 0.21 115 Ahn, Kim, & Park (2008)
#> 2 0.29 283   Basanez et al. (2013)
#> 3 0.22  80         Bounkeua (2007)
#> 4 0.26 109        Hajizadeh (2009)
#> 5 0.23  61            Hamid (2007)
#> 6 0.54 107    Hwang & Wood (2009a)

We see that the data set contains three columns. The first column called r contains the effect sizes coded as correlation coefficients, the second column called n contains the sample sizes, and the third column called study contains names of the individual studies.

We can access the individual variables using the data set name and the dollar ($) sign followed by the name of the column. For example, we can print all of the effect sizes with the df$r command.

df$r
#>  [1]  0.21  0.29  0.22  0.26  0.23  0.54  0.56  0.29  0.26  0.02 -0.06  0.38
#> [13]  0.25  0.08  0.17  0.33  0.36  0.13

The printed output shows that the data set contains mostly positive effect sizes with the largest correlation coefficient r = 0.54.

Effect size transformations

Before we start analyzing the data, we transform the effect sizes from correlation coefficients \(\rho\) to Fisher’s z. Correlation coefficients are not well suited for meta-analysis because (1) they are bounded to a range (-1, 1) with non-linear increases near the boundaries and (2) the standard error of the correlation coefficients is related to the effect size. Fisher’s z transformation mitigates both issues. It unwinds the (-1, 1) range to (\(-\infty\), \(\infty\)), makes the sampling distribution approximately normal, and breaks the dependency between standard errors and effect sizes.

To apply the transformation, we use the combine_data() function from the RoBMA package. We pass the correlation coefficients into the r argument, the sample sizes to the n argument and set the transformation argument to "fishers_z" (the study_names argument is optional). The function combine_data() then saves the transformed effect size estimates into a data frame called dfz, where the y column corresponds to Fisher’s z transformation of the correlation coefficient and se column corresponds to the standard error of Fisher’s z.

dfz <- combine_data(r = df$r, n = df$n, study_names = df$study, transformation = "fishers_z")
head(dfz)
#>           y         se             study_names study_ids weight
#> 1 0.2131713 0.09449112 Ahn, Kim, & Park (2008)        NA     NA
#> 2 0.2985663 0.05976143   Basanez et al. (2013)        NA     NA
#> 3 0.2236561 0.11396058         Bounkeua (2007)        NA     NA
#> 4 0.2661084 0.09712859        Hajizadeh (2009)        NA     NA
#> 5 0.2341895 0.13130643            Hamid (2007)        NA     NA
#> 6 0.6041556 0.09805807    Hwang & Wood (2009a)        NA     NA

We can also transform the effect sizes according to Cohen’s d transformation (which we utilize later to fit the selection models).

dfd <- combine_data(r = df$r, n = df$n, study_names = df$study, transformation = "cohens_d")
head(dfd)
#>           y        se             study_names study_ids weight
#> 1 0.4295790 0.1886397 Ahn, Kim, & Park (2008)        NA     NA
#> 2 0.6060437 0.1215862   Basanez et al. (2013)        NA     NA
#> 3 0.4510508 0.2264322         Bounkeua (2007)        NA     NA
#> 4 0.5385205 0.1950065        Hajizadeh (2009)        NA     NA
#> 5 0.4726720 0.2596249            Hamid (2007)        NA     NA
#> 6 1.2831708 0.2123140    Hwang & Wood (2009a)        NA     NA

Re analysis with random effect meta-analysis

We now estimate a random effect meta-analysis with the rma() function imported from the metafor package (Wolfgang, 2010) and verify that we arrive at the same results as reported in the Lui (2015) paper. The yi argument is used to pass the column name containing effect sizes, the sei argument is used to pass the column name containing standard errors, and the data argument is used to pass the data frame containing both variables.

fit_rma <- rma(yi = y, sei = se, data = dfz)
fit_rma
#> 
#> Random-Effects Model (k = 18; tau^2 estimator: REML)
#> 
#> tau^2 (estimated amount of total heterogeneity): 0.0229 (SE = 0.0107)
#> tau (square root of estimated tau^2 value):      0.1513
#> I^2 (total heterogeneity / total variability):   77.79%
#> H^2 (total variability / sampling variability):  4.50
#> 
#> Test for Heterogeneity:
#> Q(df = 17) = 73.5786, p-val < .0001
#> 
#> Model Results:
#> 
#> estimate      se    zval    pval   ci.lb   ci.ub      
#>   0.2538  0.0419  6.0568  <.0001  0.1717  0.3359  *** 
#> 
#> ---
#> Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1

Indeed, we find that the effect size estimate from the random effect meta-analysis corresponds to the one reported in the Lui (2015). It is important to remember that we used Fisher’s z to estimate the models; therefore, the estimated results are on the Fisher’s z scale. To transform the effect size estimate to the correlation coefficients, we can use the z2r() functionfrom the RoBMA package,

z2r(fit_rma$b)
#>              [,1]
#> intrcpt 0.2484877

Transforming the effect size estimate results in the correlation coefficient \(\rho\) = 0.25.

PET-PEESE

The first publication bias adjustment that we perform is PET-PEESE. PET-PEESE adjusts for the relationship between effect sizes and standard errors. To our knowledge, PET-PEESE is not currently implemented in any R-package. However, since PET and PEESE are weighted regressions of effect sizes on standard errors (PET) or standard errors squared (PEESE), we can estimate both PET and PEESE models with the lm() function. Inside of the lm() function call, we specify that y is the response variable (left hand side of the ~ sign) and se is the predictor (the right-hand side). Furthermore, we specify the weight argument that allows us to weight the meta-regression by inverse variance and set the data = dfz argument, which specifies that all of the variables come from the transformed, dfz, data set.

fit_PET <- lm(y ~ se, weights = 1/se^2, data = dfz)
summary(fit_PET)
#> 
#> Call:
#> lm(formula = y ~ se, data = dfz, weights = 1/se^2)
#> 
#> Weighted Residuals:
#>     Min      1Q  Median      3Q     Max 
#> -3.8132 -0.9112 -0.0139  0.5166  3.3151 
#> 
#> Coefficients:
#>               Estimate Std. Error t value Pr(>|t|)  
#> (Intercept) -0.0008722  0.1081247  -0.008   0.9937  
#> se           2.8549650  1.3593450   2.100   0.0519 .
#> ---
#> Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
#> 
#> Residual standard error: 1.899 on 16 degrees of freedom
#> Multiple R-squared:  0.2161, Adjusted R-squared:  0.1671 
#> F-statistic: 4.411 on 1 and 16 DF,  p-value: 0.05192

The summary() function allows us to explore details of the fitted model. The (Intercept) coefficient refers to the meta-analytic effect size (corrected for the correlation with standard errors). Again, it is important to keep in mind that the effect size estimate is on the Fisher’s z scale. We obtain the estimate on correlation scale with the z2r() function (we pass the estimated effect size using the summary(fit_PET)$coefficients["(Intercept)", "Estimate"] command, which extracts the estimate from the fitted model, it is equivalent with simply pasting the value directly z2r(-0.0008722083)).

z2r(summary(fit_PET)$coefficients["(Intercept)", "Estimate"])
#> [1] -0.000872208

Since the Fisher’s z transformation is almost linear around zero, we obtain an almost identical estimate.

More importantly, since the test for the effect size with PET was not significant at \(\alpha = .10\), we interpret the PET model. However, if the test for effect size were significant, we would fit and interpret the PEESE model. The PEESE model can be fitted in an analogous way, by replacing the predictor of standard errors with standard errors squared (we need to wrap the se^2 predictor in I() that tells R to square the predictor prior to fitting the model).

fit_PEESE <- lm(y ~ I(se^2), weights = 1/se^2, data = dfz)
summary(fit_PEESE)
#> 
#> Call:
#> lm(formula = y ~ I(se^2), data = dfz, weights = 1/se^2)
#> 
#> Weighted Residuals:
#>     Min      1Q  Median      3Q     Max 
#> -3.7961 -0.9581 -0.1156  0.6718  3.4608 
#> 
#> Coefficients:
#>             Estimate Std. Error t value Pr(>|t|)  
#> (Intercept)  0.11498    0.06201   1.854   0.0822 .
#> I(se^2)     15.58064    7.96723   1.956   0.0682 .
#> ---
#> Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
#> 
#> Residual standard error: 1.927 on 16 degrees of freedom
#> Multiple R-squared:  0.1929, Adjusted R-squared:  0.1425 
#> F-statistic: 3.824 on 1 and 16 DF,  p-value: 0.06821

Selection models

The second publication bias adjustment that we will perform is selection models. Selection models adjust for the different publication probabilities in different p-value intervals. Selection models are implemented in weightr package (weightfunct() function; Coburn et al. (2019)) and newly also in the metafor package (selmodel() function; Wolfgang (2010)). First, we use the weightr implementation and fit the “4PSM” selection model that specifies three distinct p-value intervals: (1) covering the range of significant p-values for effect sizes in the expected direction (0.00-0.025), (2) covering the range of “marginally” significant p-values for effect sizes in the expected direction (0.025-0.05), and covering the range of non-significant p-values (0.05-1). We use Cohen’s d transformation of the correlation coefficients since it is better at maintaining the distribution of test statistics. To fit the model, we need to pass the effect sizes (dfd$y) into the effect argument and variances (dfd$se^2) into the v argument (note that we need to pass the vector of values directly since the weightfunct() function does not allow us to pass the data frame directly as did the previous functions). We further set steps = c(0.025, 0.05) to specify the appropriate cut-points (note that the steps correspond to one-sided p-values), and we set table = TRUE to obtain the frequency of p values in each of the specified intervals.

fit_4PSM <- weightfunct(effect = dfd$y, v = dfd$se^2, steps = c(0.025, 0.05), table = TRUE)
#> Warning in weightfunct(effect = dfd$y, v = dfd$se^2, steps = c(0.025, 0.05), :
#> At least one of the p-value intervals contains three or fewer effect sizes,
#> which may lead to estimation problems. Consider re-specifying the cutpoints.
fit_4PSM
#> 
#> Unadjusted Model (k = 18):
#> 
#> tau^2 (estimated amount of total heterogeneity): 0.0920 (SE = 0.0423)
#> tau (square root of estimated tau^2 value):  0.3034
#> 
#> Test for Heterogeneity:
#> Q(df = 17) = 75.4999, p-val = 5.188348e-09
#> 
#> Model Results:
#> 
#>           estimate std.error z-stat      p-val ci.lb  ci.ub
#> Intercept    0.516   0.08473   6.09 1.1283e-09  0.35 0.6821
#> 
#> Adjusted Model (k = 18):
#> 
#> tau^2 (estimated amount of total heterogeneity): 0.1289 (SE = 0.0682)
#> tau (square root of estimated tau^2 value):  0.3590
#> 
#> Test for Heterogeneity:
#> Q(df = 17) = 75.4999, p-val = 5.188348e-09
#> 
#> Model Results:
#> 
#>                  estimate std.error z-stat   p-val   ci.lb  ci.ub
#> Intercept          0.2675    0.2009 1.3311 0.18316 -0.1264 0.6613
#> 0.025 < p < 0.05   0.5008    0.5449 0.9191 0.35803 -0.5671 1.5688
#> 0.05 < p < 1       0.1535    0.1570 0.9777 0.32821 -0.1542 0.4611
#> 
#> Likelihood Ratio Test:
#> X^2(df = 2) = 3.844252, p-val = 0.1463
#> 
#> Number of Effect Sizes per Interval:
#> 
#>                         Frequency
#> p-values <0.025                14
#> 0.025 < p-values < 0.05         1
#> 0.05 < p-values < 1             3

Note the warning message informing us about the fact that our data do not contain sufficient number of p-values in one of the p-value intervals. The model output obtained by printing the fitted model object fit_4PSM shows that there is only one p-value in the (0.025, 0.05) interval. We can deal with this issue by joining the “marginally” significant and non-significant p-value interval, resulting in the “3PSM” model.

fit_3PSM <- weightfunct(effect = dfd$y, v = dfd$se^2, steps = c(0.025), table = TRUE)
fit_3PSM
#> 
#> Unadjusted Model (k = 18):
#> 
#> tau^2 (estimated amount of total heterogeneity): 0.0920 (SE = 0.0423)
#> tau (square root of estimated tau^2 value):  0.3034
#> 
#> Test for Heterogeneity:
#> Q(df = 17) = 75.4999, p-val = 5.188348e-09
#> 
#> Model Results:
#> 
#>           estimate std.error z-stat      p-val ci.lb  ci.ub
#> Intercept    0.516   0.08473   6.09 1.1283e-09  0.35 0.6821
#> 
#> Adjusted Model (k = 18):
#> 
#> tau^2 (estimated amount of total heterogeneity): 0.1148 (SE = 0.0577)
#> tau (square root of estimated tau^2 value):  0.3388
#> 
#> Test for Heterogeneity:
#> Q(df = 17) = 75.4999, p-val = 5.188348e-09
#> 
#> Model Results:
#> 
#>               estimate std.error z-stat    p-val     ci.lb  ci.ub
#> Intercept       0.3220    0.1676  1.921 0.054698 -0.006484 0.6504
#> 0.025 < p < 1   0.2275    0.2004  1.135 0.256293 -0.165324 0.6204
#> 
#> Likelihood Ratio Test:
#> X^2(df = 1) = 3.107176, p-val = 0.077948
#> 
#> Number of Effect Sizes per Interval:
#> 
#>                      Frequency
#> p-values <0.025             14
#> 0.025 < p-values < 1         4

The new model does not suffer from the estimation problem due to the limited number of p-values in the intervals, so we can now interpreting the results with more confidence. First, we check the test for heterogeneity that clearly rejects the null hypothesis Q(df = 17) = 75.4999, $p$ = 5.188348e-09 (if we did not find evidence for heterogeneity, we could have proceeded by fitting the fixed effects version of the model by specifying the fe = TRUE argument). We follow by checking the test for publication bias which is a likelihood ratio test comparing the unadjusted and adjusted estimate X^2(df = 1) = 3.107176, $p$ = 0.077948. The result of the test is slightly ambiguous – we would reject the null hypothesis of no publication bias with \(\alpha = 0.10\) but not with \(\alpha = 0.05\).

If we decide to interpret the estimate effect size, we have to again transform it back to the correlation scale. However, this time we need to use the d2r() function since we supplied the effect sizes as Cohen’s d (note that the effect size estimate corresponds to the second value in the fit_3PSM$adj_est object for the random effect model, alternatively, we could simply use d2r(0.3219641)).

d2r(fit_3PSM$adj_est[2])
#> [1] 0.1589358

Alternatively, we could have conducted the analysis analogously but with the metafor package. First, we would fit a random effect meta-analysis with the Cohen’s d transformed effect sizes.

fit_rma_d <- rma(yi = y, sei = se, data = dfd)

Subsequently, we would have used the selmodel function, passing the estimated random effect meta-analysis object and specifying the type = "stepfun"argument to obtain a step weight function and setting the appropriate steps with the steps = c(0.025) argument.

fit_sel_d <- selmodel(fit_rma_d, type = "stepfun", steps = c(0.025))
fit_sel_d
#> 
#> Random-Effects Model (k = 18; tau^2 estimator: ML)
#> 
#> tau^2 (estimated amount of total heterogeneity): 0.1148 (SE = 0.0577)
#> tau (square root of estimated tau^2 value):      0.3388
#> 
#> Test for Heterogeneity:
#> LRT(df = 1) = 32.7499, p-val < .0001
#> 
#> Model Results:
#> 
#> estimate      se    zval    pval    ci.lb   ci.ub    
#>   0.3220  0.1676  1.9213  0.0547  -0.0065  0.6504  . 
#> 
#> Test for Selection Model Parameters:
#> LRT(df = 1) = 3.1072, p-val = 0.0779
#> 
#> Selection Model Results:
#> 
#>                      k  estimate      se     zval    pval   ci.lb   ci.ub      
#> 0     < p <= 0.025  14    1.0000     ---      ---     ---     ---     ---      
#> 0.025 < p <= 1       4    0.2276  0.2005  -3.8534  0.0001  0.0000  0.6204  *** 
#> 
#> ---
#> Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1

The output verifies the results obtained in the previous analysis.

Robust Bayesian meta-analysis

The third and final publication bias adjustment that we will perform is robust Bayesian meta-analysis (RoBMA). RoBMA uses Bayesian model-averaging to combine inference from both PET-PEESE and selection models. We use the RoBMA R package (and the RoBMA() function; Bartoš & Maier (2020)) to fit the default 36 model ensemble (called RoBMA-PSMA) based on an orthogonal combination of models assuming the presence and absence of the effect size, heterogeneity, and publication bias. The models assuming the presence of publication bias are further split into six weight function models and models utilizing the PET and PEESE publication bias adjustment. To fit the model, we can directly pass the original correlation coefficients into the r argument and sample sizes into n argument – the RoBMA() function will internally transform them to the Fisher’s z scale and, by default, return the estimates on a Cohen’s d scale which is used to specify the prior distributions (both of these settings can be changed with the prior_scale and transformation arguments, and the output can be conveniently transformed later). We further set the model argument to "PSMA" to fit the 36 model ensemble and use the seed argument to make the analysis reproducible (it uses MCMC sampling in contrast to the previous methods). We turn on parallel estimation by setting parallel = TRUE argument (the parallel processing might in some cases fail, try rerunning the model one more time or turning the parallel processing off in that case).

fit_RoBMA <- RoBMA(r = df$r, n = df$n, seed = 1, model = "PSMA", parallel = TRUE)

This step can take some time depending on your CPU. For example, this will take around ~ 1 minute on a fast CPU (e.g., AMD Ryzen 3900x 12c/24t) and up to ten minutes or longer on slower CPUs (e.g., 2.7 GHz Intel Core i5).

We use the summary() function to explore details of the fitted model.

summary(fit_RoBMA)
#> Call:
#> RoBMA(r = df$r, n = df$n, model_type = "PSMA", parallel = TRUE, 
#>     save = "min", seed = 1)
#> 
#> Robust Bayesian meta-analysis
#> Components summary:
#>               Models Prior prob. Post. prob. Inclusion BF
#> Effect         18/36       0.500       0.552        1.232
#> Heterogeneity  18/36       0.500       1.000    19168.311
#> Bias           32/36       0.500       0.845        5.436
#> 
#> Model-averaged estimates:
#>                    Mean Median  0.025  0.975
#> mu                0.195  0.087 -0.008  0.598
#> tau               0.330  0.307  0.166  0.597
#> omega[0,0.025]    1.000  1.000  1.000  1.000
#> omega[0.025,0.05] 0.936  1.000  0.438  1.000
#> omega[0.05,0.5]   0.740  1.000  0.065  1.000
#> omega[0.5,0.95]   0.697  1.000  0.028  1.000
#> omega[0.95,0.975] 0.704  1.000  0.028  1.000
#> omega[0.975,1]    0.713  1.000  0.028  1.000
#> PET               0.828  0.000  0.000  3.291
#> PEESE             0.802  0.000  0.000 10.805
#> The estimates are summarized on the Cohen's d scale (priors were specified on the Cohen's d scale).
#> (Estimated publication weights omega correspond to one-sided p-values.)

The printed output consists of two parts. The first table called Components summary contains information about the fitted models. It tells us that we estimated the ensemble with 18/36 models assuming the presence of an effect, 18/36 models assuming the presence of heterogeneity, and 32/36 models assuming the presence of the publication bias. The second column summarizes the prior model probabilities of models assuming either presence of the individual components – here, we see that the presence and absence of the components is balanced a priori. The third column contains information about the posterior probability of models assuming the presence of the components – we can observe that the posterior model probabilities of models assuming the presence of an effect slightly increased to 0.552. The last column contains information about the evidence in favor of the presence of any of those components. Evidence for the presence of an effect is undecided; the models assuming the presence of an effect are only 1.232 times more likely given the data than the models assuming the absence of an effect. However, we find overwhelming evidence in the favor of heterogeneity, with the models assuming the presence of heterogeneity being 19,168 times more likely given the data than models assuming the absence of heterogeneity, and moderate evidence in favor of publication bias.

As the name indicates, the second table called Model-averaged estimates contains information about the model-averaged estimates. The first row labeled mu corresponds to the model-averaged effect size estimate (on Cohen’s d scale) and the second row label tau corresponds to the model-averaged heterogeneity estimates. Below are the estimated model-averaged weights for the different p-value intervals and the PET and PEESE regression coefficients. We convert the estimates to the correlation coefficients by adding the output_scale = "r" argument to the summary function.

summary(fit_RoBMA, output_scale = "r")
#> Call:
#> RoBMA(r = df$r, n = df$n, model_type = "PSMA", parallel = TRUE, 
#>     save = "min", seed = 1)
#> 
#> Robust Bayesian meta-analysis
#> Components summary:
#>               Models Prior prob. Post. prob. Inclusion BF
#> Effect         18/36       0.500       0.552        1.232
#> Heterogeneity  18/36       0.500       1.000    19168.311
#> Bias           32/36       0.500       0.845        5.436
#> 
#> Model-averaged estimates:
#>                    Mean Median  0.025  0.975
#> mu                0.095  0.043 -0.004  0.286
#> tau               0.165  0.154  0.083  0.299
#> omega[0,0.025]    1.000  1.000  1.000  1.000
#> omega[0.025,0.05] 0.936  1.000  0.438  1.000
#> omega[0.05,0.5]   0.740  1.000  0.065  1.000
#> omega[0.5,0.95]   0.697  1.000  0.028  1.000
#> omega[0.95,0.975] 0.704  1.000  0.028  1.000
#> omega[0.975,1]    0.713  1.000  0.028  1.000
#> PET               0.828  0.000  0.000  3.291
#> PEESE             1.603  0.000  0.000 21.610
#> The effect size estimates are summarized on the correlation scale and heterogeneity is summarized on the Fisher's z scale (priors were specified on the Cohen's d scale).
#> (Estimated publication weights omega correspond to one-sided p-values.)

Now, we obtained the model-averaged effect size estimate on the correlation scale. If we were interested in the estimates model-averaging only across the models assuming the presence of an effect (for the effect size estimate), heterogeneity (for the heterogeneity estimate), and publication bias (for the publication bias weights and PET and PEESE regression coefficients), we could have added conditional = TRUE argument to the summary function. A quick textual summary of the model can also be generated with the interpret() function.

interpret(fit_RoBMA, output_scale = "r")
#> [1] "Robust Bayesian meta-analysis found weak evidence in favor of the effect, BF_10 = 1.23, with mean model-averaged estimate correlation = 0.095, 95% CI [-0.004,  0.286]. Robust Bayesian meta-analysis found strong evidence in favor of the heterogeneity, BF^rf = 19168.31, with mean model-averaged estimate tau = 0.165, 95% CI [0.083, 0.299]. Robust Bayesian meta-analysis found moderate evidence in favor of the publication bias, BF_pb = 5.44."

We can also obtain summary information about the individual models by specifying the type = "models" option. The resulting table shows the prior and posterior model probabilities and inclusion Bayes factors for the individual models (we also set short_name = TRUE argument reducing the width of the output by abbreviating names of the prior distributions).

summary(fit_RoBMA, type = "models", short_name = TRUE)
#> Call:
#> RoBMA(r = df$r, n = df$n, model_type = "PSMA", parallel = TRUE, 
#>     save = "min", seed = 1)
#> 
#> Robust Bayesian meta-analysis
#> Models overview:
#>  Model Prior Effect Prior Heterogeneity
#>      1         S(0)                S(0)
#>      2         S(0)                S(0)
#>      3         S(0)                S(0)
#>      4         S(0)                S(0)
#>      5         S(0)                S(0)
#>      6         S(0)                S(0)
#>      7         S(0)                S(0)
#>      8         S(0)                S(0)
#>      9         S(0)                S(0)
#>     10         S(0)         Ig(1, 0.15)
#>     11         S(0)         Ig(1, 0.15)
#>     12         S(0)         Ig(1, 0.15)
#>     13         S(0)         Ig(1, 0.15)
#>     14         S(0)         Ig(1, 0.15)
#>     15         S(0)         Ig(1, 0.15)
#>     16         S(0)         Ig(1, 0.15)
#>     17         S(0)         Ig(1, 0.15)
#>     18         S(0)         Ig(1, 0.15)
#>     19      N(0, 1)                S(0)
#>     20      N(0, 1)                S(0)
#>     21      N(0, 1)                S(0)
#>     22      N(0, 1)                S(0)
#>     23      N(0, 1)                S(0)
#>     24      N(0, 1)                S(0)
#>     25      N(0, 1)                S(0)
#>     26      N(0, 1)                S(0)
#>     27      N(0, 1)                S(0)
#>     28      N(0, 1)         Ig(1, 0.15)
#>     29      N(0, 1)         Ig(1, 0.15)
#>     30      N(0, 1)         Ig(1, 0.15)
#>     31      N(0, 1)         Ig(1, 0.15)
#>     32      N(0, 1)         Ig(1, 0.15)
#>     33      N(0, 1)         Ig(1, 0.15)
#>     34      N(0, 1)         Ig(1, 0.15)
#>     35      N(0, 1)         Ig(1, 0.15)
#>     36      N(0, 1)         Ig(1, 0.15)
#>                   Prior Bias                 Prior prob. log(marglik)
#>                                                    0.125       -74.67
#>            omega[2s: .05] ~ CumD(1, 1)             0.010       -49.60
#>        omega[2s: .1, .05] ~ CumD(1, 1, 1)          0.010       -47.53
#>            omega[1s: .05] ~ CumD(1, 1)             0.010       -41.70
#>      omega[1s: .05, .025] ~ CumD(1, 1, 1)          0.010       -38.03
#>        omega[1s: .5, .05] ~ CumD(1, 1, 1)          0.010       -44.41
#>  omega[1s: .5, .05, .025] ~ CumD(1, 1, 1, 1)       0.010       -40.79
#>                       PET ~ C(0, 1)[0, Inf]        0.031        -5.01
#>                     PEESE ~ C(0, 5)[0, Inf]        0.031       -12.17
#>                                                    0.125        -6.95
#>            omega[2s: .05] ~ CumD(1, 1)             0.010        -5.96
#>        omega[2s: .1, .05] ~ CumD(1, 1, 1)          0.010        -5.09
#>            omega[1s: .05] ~ CumD(1, 1)             0.010         2.72
#>      omega[1s: .05, .025] ~ CumD(1, 1, 1)          0.010         2.93
#>        omega[1s: .5, .05] ~ CumD(1, 1, 1)          0.010         2.91
#>  omega[1s: .5, .05, .025] ~ CumD(1, 1, 1, 1)       0.010         3.30
#>                       PET ~ C(0, 1)[0, Inf]        0.031         3.62
#>                     PEESE ~ C(0, 5)[0, Inf]        0.031         1.62
#>                                                    0.125       -13.17
#>            omega[2s: .05] ~ CumD(1, 1)             0.010       -13.10
#>        omega[2s: .1, .05] ~ CumD(1, 1, 1)          0.010       -12.87
#>            omega[1s: .05] ~ CumD(1, 1)             0.010       -12.75
#>      omega[1s: .05, .025] ~ CumD(1, 1, 1)          0.010       -12.86
#>        omega[1s: .5, .05] ~ CumD(1, 1, 1)          0.010       -13.29
#>  omega[1s: .5, .05, .025] ~ CumD(1, 1, 1, 1)       0.010       -13.25
#>                       PET ~ C(0, 1)[0, Inf]        0.031        -7.07
#>                     PEESE ~ C(0, 5)[0, Inf]        0.031        -7.58
#>                                                    0.125         1.79
#>            omega[2s: .05] ~ CumD(1, 1)             0.010         1.75
#>        omega[2s: .1, .05] ~ CumD(1, 1, 1)          0.010         2.16
#>            omega[1s: .05] ~ CumD(1, 1)             0.010         3.11
#>      omega[1s: .05, .025] ~ CumD(1, 1, 1)          0.010         3.01
#>        omega[1s: .5, .05] ~ CumD(1, 1, 1)          0.010         2.98
#>  omega[1s: .5, .05, .025] ~ CumD(1, 1, 1, 1)       0.010         3.06
#>                       PET ~ C(0, 1)[0, Inf]        0.031         2.75
#>                     PEESE ~ C(0, 5)[0, Inf]        0.031         2.55
#>  Post. prob. Inclusion BF
#>        0.000        0.000
#>        0.000        0.000
#>        0.000        0.000
#>        0.000        0.000
#>        0.000        0.000
#>        0.000        0.000
#>        0.000        0.000
#>        0.000        0.001
#>        0.000        0.000
#>        0.000        0.000
#>        0.000        0.001
#>        0.000        0.001
#>        0.033        3.231
#>        0.041        4.025
#>        0.040        3.919
#>        0.059        5.927
#>        0.243        9.957
#>        0.033        1.055
#>        0.000        0.000
#>        0.000        0.000
#>        0.000        0.000
#>        0.000        0.000
#>        0.000        0.000
#>        0.000        0.000
#>        0.000        0.000
#>        0.000        0.000
#>        0.000        0.000
#>        0.155        1.287
#>        0.012        1.201
#>        0.019        1.822
#>        0.048        4.831
#>        0.044        4.347
#>        0.043        4.223
#>        0.046        4.617
#>        0.102        3.504
#>        0.083        2.797

To obtain a summary of the individual model diagnostics we set type = "diagnostics". The resulting table provides information about the maximum MCMC error, relative MCMC error, minimum ESS, and maximum R-hat when aggregating over the parameters of each model. As we can see, we obtain acceptable ESS and R-hat diagnostic values.

summary(fit_RoBMA, type = "diagnostics")
#> Call:
#> RoBMA(r = df$r, n = df$n, model_type = "PSMA", parallel = TRUE, 
#>     save = "min", seed = 1)
#> 
#> Robust Bayesian meta-analysis
#> Diagnostics overview:
#>  Model Prior Effect Prior Heterogeneity
#>      1     Spike(0)            Spike(0)
#>      2     Spike(0)            Spike(0)
#>      3     Spike(0)            Spike(0)
#>      4     Spike(0)            Spike(0)
#>      5     Spike(0)            Spike(0)
#>      6     Spike(0)            Spike(0)
#>      7     Spike(0)            Spike(0)
#>      8     Spike(0)            Spike(0)
#>      9     Spike(0)            Spike(0)
#>     10     Spike(0)   InvGamma(1, 0.15)
#>     11     Spike(0)   InvGamma(1, 0.15)
#>     12     Spike(0)   InvGamma(1, 0.15)
#>     13     Spike(0)   InvGamma(1, 0.15)
#>     14     Spike(0)   InvGamma(1, 0.15)
#>     15     Spike(0)   InvGamma(1, 0.15)
#>     16     Spike(0)   InvGamma(1, 0.15)
#>     17     Spike(0)   InvGamma(1, 0.15)
#>     18     Spike(0)   InvGamma(1, 0.15)
#>     19 Normal(0, 1)            Spike(0)
#>     20 Normal(0, 1)            Spike(0)
#>     21 Normal(0, 1)            Spike(0)
#>     22 Normal(0, 1)            Spike(0)
#>     23 Normal(0, 1)            Spike(0)
#>     24 Normal(0, 1)            Spike(0)
#>     25 Normal(0, 1)            Spike(0)
#>     26 Normal(0, 1)            Spike(0)
#>     27 Normal(0, 1)            Spike(0)
#>     28 Normal(0, 1)   InvGamma(1, 0.15)
#>     29 Normal(0, 1)   InvGamma(1, 0.15)
#>     30 Normal(0, 1)   InvGamma(1, 0.15)
#>     31 Normal(0, 1)   InvGamma(1, 0.15)
#>     32 Normal(0, 1)   InvGamma(1, 0.15)
#>     33 Normal(0, 1)   InvGamma(1, 0.15)
#>     34 Normal(0, 1)   InvGamma(1, 0.15)
#>     35 Normal(0, 1)   InvGamma(1, 0.15)
#>     36 Normal(0, 1)   InvGamma(1, 0.15)
#>                          Prior Bias                         max[error(MCMC)]
#>                                                                           NA
#>            omega[two-sided: .05] ~ CumDirichlet(1, 1)                0.00024
#>        omega[two-sided: .1, .05] ~ CumDirichlet(1, 1, 1)             0.00295
#>            omega[one-sided: .05] ~ CumDirichlet(1, 1)                0.00014
#>      omega[one-sided: .05, .025] ~ CumDirichlet(1, 1, 1)             0.00326
#>        omega[one-sided: .5, .05] ~ CumDirichlet(1, 1, 1)             0.00033
#>  omega[one-sided: .5, .05, .025] ~ CumDirichlet(1, 1, 1, 1)          0.00309
#>                              PET ~ Cauchy(0, 1)[0, Inf]              0.00236
#>                            PEESE ~ Cauchy(0, 5)[0, Inf]              0.01223
#>                                                                      0.00118
#>            omega[two-sided: .05] ~ CumDirichlet(1, 1)                0.00296
#>        omega[two-sided: .1, .05] ~ CumDirichlet(1, 1, 1)             0.00295
#>            omega[one-sided: .05] ~ CumDirichlet(1, 1)                0.00110
#>      omega[one-sided: .05, .025] ~ CumDirichlet(1, 1, 1)             0.00331
#>        omega[one-sided: .5, .05] ~ CumDirichlet(1, 1, 1)             0.00357
#>  omega[one-sided: .5, .05, .025] ~ CumDirichlet(1, 1, 1, 1)          0.00307
#>                              PET ~ Cauchy(0, 1)[0, Inf]              0.00454
#>                            PEESE ~ Cauchy(0, 5)[0, Inf]              0.02470
#>                                                                      0.00038
#>            omega[two-sided: .05] ~ CumDirichlet(1, 1)                0.00303
#>        omega[two-sided: .1, .05] ~ CumDirichlet(1, 1, 1)             0.00290
#>            omega[one-sided: .05] ~ CumDirichlet(1, 1)                0.00309
#>      omega[one-sided: .05, .025] ~ CumDirichlet(1, 1, 1)             0.00278
#>        omega[one-sided: .5, .05] ~ CumDirichlet(1, 1, 1)             0.00332
#>  omega[one-sided: .5, .05, .025] ~ CumDirichlet(1, 1, 1, 1)          0.00293
#>                              PET ~ Cauchy(0, 1)[0, Inf]              0.03247
#>                            PEESE ~ Cauchy(0, 5)[0, Inf]              0.05228
#>                                                                      0.00090
#>            omega[two-sided: .05] ~ CumDirichlet(1, 1)                0.00308
#>        omega[two-sided: .1, .05] ~ CumDirichlet(1, 1, 1)             0.00293
#>            omega[one-sided: .05] ~ CumDirichlet(1, 1)                0.00477
#>      omega[one-sided: .05, .025] ~ CumDirichlet(1, 1, 1)             0.00340
#>        omega[one-sided: .5, .05] ~ CumDirichlet(1, 1, 1)             0.00543
#>  omega[one-sided: .5, .05, .025] ~ CumDirichlet(1, 1, 1, 1)          0.00499
#>                              PET ~ Cauchy(0, 1)[0, Inf]              0.04070
#>                            PEESE ~ Cauchy(0, 5)[0, Inf]              0.07238
#>  max[error(MCMC)/SD] min(ESS) max(R-hat)
#>                   NA       NA         NA
#>                0.016     4158      1.000
#>                0.016     3793      1.000
#>                0.015     4622      1.000
#>                0.017     3357      1.000
#>                0.017     3509      1.001
#>                0.018     3064      1.001
#>                0.010     9917      1.001
#>                0.010     9589      1.000
#>                0.010     9632      1.001
#>                0.013     5518      1.002
#>                0.015     4565      1.001
#>                0.015     4395      1.001
#>                0.015     4502      1.002
#>                0.018     3206      1.001
#>                0.017     3480      1.001
#>                0.012     7342      1.001
#>                0.012     7051      1.000
#>                0.010     9712      1.001
#>                0.013     5522      1.000
#>                0.015     4382      1.001
#>                0.013     5771      1.000
#>                0.014     4859      1.001
#>                0.015     4430      1.000
#>                0.016     4135      1.001
#>                0.042      565      1.005
#>                0.024     1678      1.001
#>                0.011     7736      1.000
#>                0.014     5254      1.001
#>                0.016     4103      1.001
#>                0.021     2240      1.001
#>                0.020     2527      1.001
#>                0.026     1529      1.007
#>                0.024     1756      1.000
#>                0.038      692      1.001
#>                0.024     1765      1.005

Finally, we can also plot the model-averaged posterior distribution with the plot() function. We set prior = TRUE parameter to include the prior distribution as a grey line (and arrow for the point density at zero) and output_scale = "r" to transform the posterior distribution to the correlation scale (the default figure output would be on Cohen’s d scale). (The par(mar = c(4, 4, 1, 4)) call increases the left margin of the figure, so the secondary y-axis text is not cut off.)

par(mar = c(4, 4, 1, 4))
plot(fit_RoBMA, prior = TRUE, output_scale = "r", )

Specifying Different Priors

The RoBMA package allows us to fit ensembles of highly customized meta-analytic models. Here we reproduce the ensemble for perinull directional hypothesis test from the Appendix (see the R package vignettes for more examples and details). Instead of using the fully pre-specified model with the model = "PSMA" argument, we explicitly specify the prior distribution for models assuming presence of the effect with the priors_effect = prior("normal", parameters = list(mean = 0.60, sd = 0.20), truncation = list(0, Inf)) argument, which assigns Normal(0.60, 0.20) distribution bounded to the positive numbers to the \(\mu\) parameter (note that the prior distribution is specified on the Cohen’s d scale, corresponding to 95% prior probability mass contained approximately in the \(\rho\) = (0.10, 0.45) interval). Similarly, we also exchange the default prior distribution for the models assuming absence of the effect with a perinull hypothesis with the priors_effect_null = prior("normal", parameters = list(mean = 0, sd = 0.10))) argument that sets 95% prior probability mass to values in the \(\rho\) = (-0.10, 0.10) interval.

fit_RoBMA2 <- RoBMA(r = df$r, n = df$n, seed = 2, parallel = TRUE,
                    priors_effect      = prior("normal", parameters = list(mean = 0.60, sd = 0.20), truncation = list(0, Inf)),
                    priors_effect_null = prior("normal", parameters = list(mean = 0,    sd = 0.10)))

As previously, we can use the summary() function to inspect the model fit and verify that the specified models correspond to the settings.

summary(fit_RoBMA2, type = "models")
#> Call:
#> RoBMA(r = df$r, n = df$n, priors_effect = prior("normal", parameters = list(mean = 0.6, 
#>     sd = 0.2), truncation = list(0, Inf)), priors_effect_null = prior("normal", 
#>     parameters = list(mean = 0, sd = 0.1)), parallel = TRUE, 
#>     save = "min", seed = 2)
#> 
#> Robust Bayesian meta-analysis
#> Models overview:
#>  Model       Prior Effect       Prior Heterogeneity
#>      1           Normal(0, 0.1)            Spike(0)
#>      2           Normal(0, 0.1)            Spike(0)
#>      3           Normal(0, 0.1)            Spike(0)
#>      4           Normal(0, 0.1)            Spike(0)
#>      5           Normal(0, 0.1)            Spike(0)
#>      6           Normal(0, 0.1)            Spike(0)
#>      7           Normal(0, 0.1)            Spike(0)
#>      8           Normal(0, 0.1)            Spike(0)
#>      9           Normal(0, 0.1)            Spike(0)
#>     10           Normal(0, 0.1)   InvGamma(1, 0.15)
#>     11           Normal(0, 0.1)   InvGamma(1, 0.15)
#>     12           Normal(0, 0.1)   InvGamma(1, 0.15)
#>     13           Normal(0, 0.1)   InvGamma(1, 0.15)
#>     14           Normal(0, 0.1)   InvGamma(1, 0.15)
#>     15           Normal(0, 0.1)   InvGamma(1, 0.15)
#>     16           Normal(0, 0.1)   InvGamma(1, 0.15)
#>     17           Normal(0, 0.1)   InvGamma(1, 0.15)
#>     18           Normal(0, 0.1)   InvGamma(1, 0.15)
#>     19 Normal(0.6, 0.2)[0, Inf]            Spike(0)
#>     20 Normal(0.6, 0.2)[0, Inf]            Spike(0)
#>     21 Normal(0.6, 0.2)[0, Inf]            Spike(0)
#>     22 Normal(0.6, 0.2)[0, Inf]            Spike(0)
#>     23 Normal(0.6, 0.2)[0, Inf]            Spike(0)
#>     24 Normal(0.6, 0.2)[0, Inf]            Spike(0)
#>     25 Normal(0.6, 0.2)[0, Inf]            Spike(0)
#>     26 Normal(0.6, 0.2)[0, Inf]            Spike(0)
#>     27 Normal(0.6, 0.2)[0, Inf]            Spike(0)
#>     28 Normal(0.6, 0.2)[0, Inf]   InvGamma(1, 0.15)
#>     29 Normal(0.6, 0.2)[0, Inf]   InvGamma(1, 0.15)
#>     30 Normal(0.6, 0.2)[0, Inf]   InvGamma(1, 0.15)
#>     31 Normal(0.6, 0.2)[0, Inf]   InvGamma(1, 0.15)
#>     32 Normal(0.6, 0.2)[0, Inf]   InvGamma(1, 0.15)
#>     33 Normal(0.6, 0.2)[0, Inf]   InvGamma(1, 0.15)
#>     34 Normal(0.6, 0.2)[0, Inf]   InvGamma(1, 0.15)
#>     35 Normal(0.6, 0.2)[0, Inf]   InvGamma(1, 0.15)
#>     36 Normal(0.6, 0.2)[0, Inf]   InvGamma(1, 0.15)
#>                          Prior Bias                         Prior prob.
#>                                                                   0.125
#>            omega[two-sided: .05] ~ CumDirichlet(1, 1)             0.010
#>        omega[two-sided: .1, .05] ~ CumDirichlet(1, 1, 1)          0.010
#>            omega[one-sided: .05] ~ CumDirichlet(1, 1)             0.010
#>      omega[one-sided: .05, .025] ~ CumDirichlet(1, 1, 1)          0.010
#>        omega[one-sided: .5, .05] ~ CumDirichlet(1, 1, 1)          0.010
#>  omega[one-sided: .5, .05, .025] ~ CumDirichlet(1, 1, 1, 1)       0.010
#>                              PET ~ Cauchy(0, 1)[0, Inf]           0.031
#>                            PEESE ~ Cauchy(0, 5)[0, Inf]           0.031
#>                                                                   0.125
#>            omega[two-sided: .05] ~ CumDirichlet(1, 1)             0.010
#>        omega[two-sided: .1, .05] ~ CumDirichlet(1, 1, 1)          0.010
#>            omega[one-sided: .05] ~ CumDirichlet(1, 1)             0.010
#>      omega[one-sided: .05, .025] ~ CumDirichlet(1, 1, 1)          0.010
#>        omega[one-sided: .5, .05] ~ CumDirichlet(1, 1, 1)          0.010
#>  omega[one-sided: .5, .05, .025] ~ CumDirichlet(1, 1, 1, 1)       0.010
#>                              PET ~ Cauchy(0, 1)[0, Inf]           0.031
#>                            PEESE ~ Cauchy(0, 5)[0, Inf]           0.031
#>                                                                   0.125
#>            omega[two-sided: .05] ~ CumDirichlet(1, 1)             0.010
#>        omega[two-sided: .1, .05] ~ CumDirichlet(1, 1, 1)          0.010
#>            omega[one-sided: .05] ~ CumDirichlet(1, 1)             0.010
#>      omega[one-sided: .05, .025] ~ CumDirichlet(1, 1, 1)          0.010
#>        omega[one-sided: .5, .05] ~ CumDirichlet(1, 1, 1)          0.010
#>  omega[one-sided: .5, .05, .025] ~ CumDirichlet(1, 1, 1, 1)       0.010
#>                              PET ~ Cauchy(0, 1)[0, Inf]           0.031
#>                            PEESE ~ Cauchy(0, 5)[0, Inf]           0.031
#>                                                                   0.125
#>            omega[two-sided: .05] ~ CumDirichlet(1, 1)             0.010
#>        omega[two-sided: .1, .05] ~ CumDirichlet(1, 1, 1)          0.010
#>            omega[one-sided: .05] ~ CumDirichlet(1, 1)             0.010
#>      omega[one-sided: .05, .025] ~ CumDirichlet(1, 1, 1)          0.010
#>        omega[one-sided: .5, .05] ~ CumDirichlet(1, 1, 1)          0.010
#>  omega[one-sided: .5, .05, .025] ~ CumDirichlet(1, 1, 1, 1)       0.010
#>                              PET ~ Cauchy(0, 1)[0, Inf]           0.031
#>                            PEESE ~ Cauchy(0, 5)[0, Inf]           0.031
#>  log(marglik) Post. prob. Inclusion BF
#>        -18.84       0.000        0.000
#>        -17.66       0.000        0.000
#>        -17.06       0.000        0.000
#>        -17.35       0.000        0.000
#>        -17.04       0.000        0.000
#>        -18.11       0.000        0.000
#>        -17.69       0.000        0.000
#>         -5.24       0.000        0.000
#>         -7.61       0.000        0.000
#>         -3.20       0.000        0.003
#>         -1.45       0.000        0.022
#>         -0.42       0.001        0.061
#>          3.01       0.020        1.939
#>          3.19       0.024        2.317
#>          3.09       0.022        2.104
#>          3.46       0.031        3.062
#>          3.64       0.112        3.909
#>          2.35       0.031        0.986
#>        -11.84       0.000        0.000
#>        -11.88       0.000        0.000
#>        -11.71       0.000        0.000
#>        -11.54       0.000        0.000
#>        -11.70       0.000        0.000
#>        -12.05       0.000        0.000
#>        -12.07       0.000        0.000
#>         -8.38       0.000        0.000
#>         -7.36       0.000        0.000
#>          3.35       0.337        3.564
#>          3.13       0.023        2.190
#>          3.42       0.030        2.951
#>          4.12       0.061        6.123
#>          3.85       0.046        4.602
#>          3.94       0.050        5.027
#>          3.84       0.046        4.572
#>          3.23       0.074        2.492
#>          3.44       0.092        3.132

References

Bartoš, F., & Maier, M. (2020). RoBMA: An R package for robust Bayesian meta-analyses. https://CRAN.R-project.org/package=RoBMA
Bartoš, F., Maier, Maximilian, Quintana, D. S., & Wagenmakers, E.-J. (2022a). Adjusting for publication bias in JASP and RSelection models, PET-PEESE, and robust Bayesian meta-analysis. Advances in Methods and Practices in Psychological Science, 5(3), 1–19. https://doi.org/10.1177/25152459221109259
Bartoš, F., Maier, M., Wagenmakers, E.-J., Doucouliagos, H., & Stanley, T. D. (2022b). Robust Bayesian meta-analysis: Model-averaging across complementary publication bias adjustment methods. Research Synthesis Methods. https://doi.org/10.1002/jrsm.1594
Coburn, K. M., Vevea, J. L., & Coburn, M. K. M. (2019). weightr: Estimating weight-function models for publication bias. Https://CRAN.R-Project.org/Package=weightr.
Iyengar, S., & Greenhouse, J. B. (1988). Selection models and the file drawer problem. Statistical Science, 3(1), 109–117. https://doi.org/10.1214/ss/1177013012
Lui, P. P. (2015). Intergenerational cultural conflict, mental health, and educational outcomes among asian and Latino/a Americans: Qualitative and meta-analytic review. Psychological Bulletin, 141(2), 404–446. https://doi.org/10.1037/a0038449
Maier, M., Bartoš, F., & Wagenmakers, E.-J. (2022). Robust Bayesian meta-analysis: Addressing publication bias with model-averaging. Psychological Methods. https://doi.org/10.1037/met0000405
Stanley, T. D. (2017). Limitations of PET-PEESE and other meta-analysis methods. Social Psychological and Personality Science, 8(5), 581–591. https://doi.org/10.1177/1948550617693062
Stanley, T. D., & Doucouliagos, H. (2014). Meta-regression approximations to reduce publication selection bias. Research Synthesis Methods, 5(1), 60–78. https://doi.org/10.1002/jrsm.1095
Vevea, J. L., & Hedges, L. V. (1995). A general linear model for estimating effect size in the presence of publication bias. Psychometrika, 60(3), 419–435. https://doi.org/10.1007/BF02294384
Wolfgang, V. (2010). Conducting meta-analyses in R with the metafor package. Journal of Statistical Software, 36(3), 1–48. https://www.jstatsoft.org/v36/i03/