Getting started

Overview

The D-score is a one-number summary measure of early child development. The D-score has a fixed unit. In principle, we may use the D-score to answer questions on the individual, group and population level, but be aware that no instruments have yet been validated for individual application. For more background, see the introductory booklet D-score: Turning milestones into measurement.

This vignette shows how to estimate the D-score and the D-score age-adjusted Z-score (DAZ) from child data on developmental milestones. The vignette covers some typical actions needed when estimating the D-score and DAZ:

  1. Identify whether the dscore package covers your measurement instrument;
  2. Map your variable names to the GSED 9-position schema;
  3. Calculate D-score and DAZ;
  4. Summarise your results.

Is your measurement instrument covered?

The dscore package covers a subset of all possible assessment instruments. Moreover, it may have a restricted age range for a given instrument. Your first tasks are

The inventory by Fernald et al. (2017) identified 147 instruments for assessing the development of children aged 0-8 years. Well-known examples include the Bayley Scales for Infant and Toddler Development and the Ages & Stages Questionnaires. The D-score is defined by and calculated from, subsets of milestones from such instruments.

Assessment instruments connect to the D-score through a measurement model. We use the term key to refer to a particular instance of a measurement model. The dscore package currently supports the following keys (in historic order):

  1. dutch, a model developed for the Dutch development instrument;
  2. gcdg, a model covering 14 instruments using direct measurements;
  3. gsed1912, covers 20 instruments using a mix of direct and caregiver-reported measurements (Dec 2019);
  4. 293_0, covers only GSED SF (138 items) and GSED LF (155 items). GSED core model. (Aug 2022)
  5. gsed2212, covers 23 instruments using a mix of direct and caregiver-reported measurements. Extends the GSED core model. (Jan 2022).

Different keys lead to different D-scores. Hence, we may compare only D-scores that are calculated under the same key. Our advice to set the key is:

The table given below displays the number of items per instrument for various keys. If the entry is blank, the key does not cover the instrument.

Code Instrument Items dutch gcdg gsed1912 gsed2212 293_0
aqi Ages & Stages Questionnaires-3 230 29 17 17
bar Barrera Moncada 22 15 13 13
bat Battelle Development Inventory and Screener-2 137
by1 Bayley Scales for Infant and Toddler Development-1 156 85 76 76
by2 Bayley Scales for Infant and Toddler Development-2 121 16 16 16
by3 Bayley Scales for Infant and Toddler Development-3 320 105 67 67
cro Caregiver Reported Early Development Instrument (CREDI) 149 62 64
ddi Dutch Development Instrument (Van Wiechenschema) 77 76 65 64 64
den Denver-2 111 67 50 50
dmc Developmental Milestones Checklist 66 43 43
gri Griffiths Mental Development Scales 312 104 93 18
gs1 GSED SF (v1, Phase 2 validation) 139 138
gl1 GSED LF (v1, Phase 2 validation) 155 155
gh1 GSED HF (v1, JAN 2023 version 20230113) 55 55
gto GSED LF (v0, Phase 1 validation) 155 155 155
gpa GSED SF (v0, Phase 1 validation) 139 138 138
iyo Infant and Young Child Development (IYCD) 90 55 57
kdi Kilifi Developmental Inventory 69 48 48
mac MacArthur Communicative Development Inventory 6 3 3 3
mds WHO Motor Development Milestones 6 1 1
mdt Malawi Developmental Assessment Tool (MDAT) 136 126 126
peg Pegboard 2 1 1 1
pri Project on Child Development Indicators (PRIDI) 63
sbi Stanford Binet Intelligence Scales-4/5 33 6 5 5
sgr Griffiths for South Africa 58 19 19 19
tep Test de Desarrollo Psicomotor (TEPSI) 61 33 31 31
vin Vineland Social Maturity Scale 50 17 17 17
76 565 807 818 293
Extensions
ecd Eerly Child Development Indicators (ECDI) 20 18
mul Mullen Scales of Early Learning 232 138

Unfortunately, it is not possible to calculate the D-score if your instrument is not on the list, or if all of its entries under the key headings are blank. You may wish to file an extension request to incorporate your instrument in a future version of the dscore package. It remains an empirical question, however, whether the requested extension is possible.

For some instruments, e.g., for cro only one choice is possible ("gsed"). For gri, we may choose between "gcdg" and "gsed1912" or "gsed2212". Your choice may depend on the goal of your analysis. If you want to compare to other D-scores calculated under key "gcdg", or reproduce an analysis made under that key, then pick "gcdg". If that is not the case, then "gsed2212" is probably a better choice because of its broader generalizability. The default key is "gsed". Before version 1.5.0 the default linked to "gsed1912". Since version 1.7.0 the default selects "gsed2212".

The extensions for Mullen were added to the “"gsed1912" key. The extension was made based on two datasets, the Provide dataset (Nelson) and the Bambam dataset (Deoni). The Mullen items were matched to existing items and two well fitting items were selected as anchors in a new model on the combined Provide and Bambam data.

The designs of the original cohorts determine the age coverage for each instrument. The figure above indicates the age range currently supported by the "gsed2212" key. Some instruments contain many items for the first two years (e.g., by1, dmc), whereas others cover primarily upper ages (e.g., tep, ecd). If you find that the ages in your sample deviate from those in the figure, you may wish to file an extension request to incorporate new ages in a future version of the dscore package.

Map variable names to the GSED 9-position schema

The dscore() function accepts item names that follow the GSED 9-position schema. A name with a length of nine characters identifies every milestone. The following table shows the construction of names.

Position Description Example
1-3 instrument by3
4-5 developmental domain cg
6 administration mode d
7-9 item number 018

Thus, item by3cgd018 refers to the 18th item in the cognitive scale of the Bayley-III. The label of the item can be obtained by

library(dscore)
get_labels("by3cgd018")
##           by3cgd018 
## "Inspects own hand"

You may decompose item names into components as follows:

decompose_itemnames(c("by3cgd018", "denfmd014"))
##   instrument domain mode number
## 1        by3     cg    d    018
## 2        den     fm    d    014

This function returns a data.frame with four character vectors.

The dscore package can recognise 3843 item names. The expression get_itemnames() returns a (long) vector of all known item names. Let us construct a table of instruments by domains:

items <- get_itemnames()
din <- decompose_itemnames(items)
knitr::kable(with(din, table(instrument, domain)), format = "html") |>
  kableExtra::column_spec(1, monospace = TRUE)
NA ad cg cl cm co eh ex fa fm fr gm hd hs la lg li md mo pd px re se sl vs wm xx
aqi 1 0 0 0 63 0 0 0 0 61 0 62 0 0 0 0 0 0 0 0 68 0 0 67 0 0 0
bar 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 66
bat 0 26 26 0 27 0 0 0 0 0 0 0 0 0 0 0 0 0 30 0 0 0 0 28 0 0 0
by1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 134 0 66 0 0 0 0 0 0 0
by2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 165 0 109 0 0 0 0 0 0 0
by3 0 0 91 0 0 0 0 48 0 66 0 72 0 0 0 0 0 0 0 0 0 49 0 0 0 0 0
cro 0 0 0 51 0 0 0 0 0 0 0 0 0 0 0 0 0 0 39 0 0 0 59 0 0 0 0
ddi 0 0 0 0 27 0 0 0 0 27 0 27 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
den 0 0 0 0 0 0 0 0 0 29 0 32 0 0 0 39 0 0 0 0 0 0 0 25 0 0 0
dmc 0 0 0 0 0 0 0 0 0 11 0 17 0 0 0 11 0 0 0 0 0 0 0 27 0 0 0
ecd 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 20
gh1 0 0 3 0 0 0 0 0 0 0 0 0 0 0 0 15 4 0 23 0 0 0 10 0 0 0 0
gl1 0 0 0 0 0 0 0 0 0 54 0 49 0 0 0 52 0 0 0 0 0 0 0 0 0 0 0
gpa 0 0 1 30 1 0 0 0 0 1 0 8 0 0 2 16 0 0 48 0 0 0 28 0 0 0 4
gri 0 0 86 0 0 0 86 0 0 0 0 86 0 86 0 0 0 0 0 0 0 38 0 0 0 0 0
gs1 0 0 11 0 0 0 0 0 0 0 0 0 0 0 0 39 12 0 56 0 0 0 21 0 0 0 0
gsd 0 0 1 0 0 0 0 0 0 1 0 3 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0
gto 0 0 0 0 0 0 0 0 0 54 0 49 0 0 0 52 0 0 0 0 0 0 0 0 0 0 0
hyp 0 0 0 0 0 0 0 0 0 0 0 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
iyo 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 30 0 0 40 0 0 0 20 0 0 0 0
kdi 0 0 0 0 0 0 0 0 0 34 0 35 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
mac 0 0 0 0 0 0 0 0 0 0 0 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
mds 0 0 0 0 0 0 0 0 0 0 0 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
mdt 0 0 0 0 0 0 0 0 0 34 0 34 0 0 0 34 0 0 0 0 0 0 34 0 0 0 0
mul 0 0 50 0 0 0 0 50 0 48 0 36 0 0 0 0 0 0 0 0 0 48 0 0 0 0 0
peg 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
pri 0 0 0 0 0 0 0 0 34 0 0 0 13 0 0 0 0 0 0 0 0 0 16 0 0 0 0
rap 0 0 0 30 1 0 0 0 0 0 0 5 0 0 0 16 0 0 48 0 0 0 28 0 0 0 11
sbi 0 0 0 0 0 0 0 0 0 0 12 0 0 0 0 0 0 0 0 0 0 0 0 0 21 29 0
sgr 0 0 0 0 0 0 22 0 0 13 0 27 0 22 0 0 0 0 0 0 0 36 0 0 0 0 0
tep 0 0 0 0 0 11 0 0 0 0 0 0 0 0 0 36 0 0 17 0 0 0 0 0 0 0 0
vin 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 50

We obtain the first three item names and labels from the mdt domain gm as

items <- head(get_itemnames(instrument = "mdt", domain = "gm"), 3)
get_labels(items)
##                                          mdtgmd001 
##                             "Lifts chin off floor" 
##                                          mdtgmd002 
## "Prone (on tummy), can lift head up to 90 degrees" 
##                                          mdtgmd003 
##             "Holds head upright for a few seconds"

In practice, you need to spend some time to figure out how item names in your data map to those in the dscore package. Once you’ve completed this mapping, rename the items into the GSED 9-position schema. For example, suppose that your first three gross motor MDAT items are called mot1, mot2, and mot3.

data <- data.frame(
  id = c(1, 1, 2), age = c(1, 1.6, 0.9), mot1 = c(1, NA, NA),
  mot2 = c(0, 1, 1), mot3 = c(NA, 0, 1)
)
data
##   id age mot1 mot2 mot3
## 1  1 1.0    1    0   NA
## 2  1 1.6   NA    1    0
## 3  2 0.9   NA    1    1

Renaming is easy to do by changing the names attribute.

old_names <- names(data)[3:5]
new_names <- get_itemnames(instrument = "mdt", domain = "gm")[1:3]
names(data)[3:5] <- new_names
data
##   id age mdtgmd001 mdtgmd002 mdtgmd003
## 1  1 1.0         1         0        NA
## 2  1 1.6        NA         1         0
## 3  2 0.9        NA         1         1

There may be different versions and revision of the same instrument. Therefore, carefully check whether the item labels match up with the labels in version of the instrument that you administered.

The dscore package assumes that response to milestones are dichotomous (1 = PASS, 0 = FAIL). If necessary, recode your data to match these response categories.

Calculate the D-score and DAZ

Once the data are in proper shape, calculation of the D-score and DAZ is easy.

The milestones dataset in the dscore package contains responses of 27 preterm children measured at various age between birth and 2.5 years on the Dutch Development Instrument (ddi). The dataset looks like:

head(milestones[, c(1, 3, 4, 9:14)])
##    id       age    sex ddigmd053 ddigmd056 ddicmm030 ddifmd002 ddifmd003
## 1 111 0.4873374   male         1         1         1         1         1
## 2 111 0.6570842   male        NA        NA        NA        NA         1
## 3 111 1.1800137   male        NA        NA        NA        NA        NA
## 4 111 1.9055441   male        NA        NA        NA        NA        NA
## 5 177 0.5503080 female         1         1         1         1         1
## 6 177 0.7665982 female        NA        NA        NA        NA         1
##   ddifmm004
## 1         0
## 2         1
## 3        NA
## 4        NA
## 5         1
## 6         1

Each row corresponds to a visit. Most children have three or four visits. Columns starting with ddi hold the responses on DDI-items. A 1 means a PASS, a 0 means a FAIL, and NA means that the item was not administered.

The milestones dataset has properly named columns that identify each item. Calculating the D-score and DAZ is then done by:

ds <- dscore(milestones)
dim(ds)
## [1] 100   6

Where ds is a data.frame with the same number of rows as the input data. The first six rows are

head(ds)
##        a  n      p     d      sem    daz
## 1 0.4873 11 0.9091 30.76 3.751319 -0.629
## 2 0.6571 14 0.6429 29.06 2.518082 -2.717
## 3 1.1800 19 0.9474 53.35 3.414966  0.001
## 4 1.9055 13 0.8462 63.88 2.971594 -0.090
## 5 0.5503 11 0.8182 28.75 3.476988 -1.857
## 6 0.7666 14 0.7857 34.21 3.088920 -2.372

The table below provides the interpretation of the output:

Name Interpretation
a Decimal age
n number of items used to calculate D-score
p Percentage of passed milestones
d D-score estimate, mean of posterior
sem Standard error of measurement, standard deviation of the posterior
daz D-score corrected for age

Summarise D-score and DAZ

Combine the milestones data and the result by

md <- cbind(milestones, ds)

We may plot the 27 individual developmental curves by

library(ggplot2)
library(dplyr)

r <- builtin_references |>
  filter(population == "dutch") |>
  select(age, SDM2, SD0, SDP2)

ggplot(md, aes(x = a, y = d, group = id, color = sex)) +
  theme_light() +
  theme(legend.position = c(.85, .15)) +
  theme(legend.background = element_blank()) +
  theme(legend.key = element_blank()) +
  annotate("polygon",
    x = c(r$age, rev(r$age)),
    y = c(r$SDM2, rev(r$SDP2)), alpha = 0.1, fill = "green"
  ) +
  annotate("line", x = r$age, y = r$SDM2, lwd = 0.3, alpha = 0.2, color = "green") +
  annotate("line", x = r$age, y = r$SDP2, lwd = 0.3, alpha = 0.2, color = "green") +
  annotate("line", x = r$age, y = r$SD0, lwd = 0.5, alpha = 0.2, color = "green") +
  coord_cartesian(xlim = c(0, 2.5)) +
  ylab(expression(paste(italic(D), "-score", sep = ""))) +
  xlab("Age (in years)") +
  scale_color_brewer(palette = "Set1") +
  geom_line(lwd = 0.1) +
  geom_point(size = 1)
## Warning: A numeric `legend.position` argument in `theme()` was deprecated in ggplot2
## 3.5.0.
## ℹ Please use the `legend.position.inside` argument of `theme()` instead.
## This warning is displayed once every 8 hours.
## Call `lifecycle::last_lifecycle_warnings()` to see where this warning was
## generated.

Note that similarity of these curves to growth curves for body height and weight.

The DAZ is an age-standardized D-score with a standard normal distribution with mean 0 and variance 1. We plot the individual DAZ curves relative to the Dutch references by

ggplot(md, aes(x = a, y = daz, group = id, color = factor(sex))) +
  theme_light() +
  theme(legend.position = c(.85, .15)) +
  theme(legend.background = element_blank()) +
  theme(legend.key = element_blank()) +
  scale_color_brewer(palette = "Set1") +
  annotate("rect",
    xmin = -Inf, xmax = Inf, ymin = -2, ymax = 2, alpha = 0.1,
    fill = "green"
  ) +
  coord_cartesian(
    xlim = c(0, 2.5),
    ylim = c(-4, 4)
  ) +
  geom_line(lwd = 0.1) +
  geom_point(size = 1) +
  xlab("Age (in years)") +
  ylab("DAZ")

Note that the D-scores and DAZ are a little lower than average. The explanation here is that these all children are born preterm. We can account for prematurity by correcting for gestational age.

The distributions of DAZ for boys and girls show that a large overlap:

ggplot(md) +
  theme_light() +
  scale_fill_brewer(palette = "Set1") +
  geom_density(aes(x = daz, group = sex, fill = sex),
    alpha = 0.4,
    adjust = 1.5, color = "transparent"
  ) +
  xlab("DAZ")

Under the assumption of independence, we may test whether sex differences are constant in age by a linear regression that includes the interaction between age and sex:

summary(lm(daz ~ age * sex, data = md))
## 
## Call:
## lm(formula = daz ~ age * sex, data = md)
## 
## Residuals:
##      Min       1Q   Median       3Q      Max 
## -2.12270 -0.74970 -0.06271  0.66999  2.74876 
## 
## Coefficients:
##             Estimate Std. Error t value Pr(>|t|)    
## (Intercept) -2.20467    0.31613  -6.974 3.92e-10 ***
## age          1.20601    0.26456   4.559 1.52e-05 ***
## sexmale      0.04247    0.43812   0.097    0.923    
## age:sexmale -0.10201    0.35152  -0.290    0.772    
## ---
## Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
## 
## Residual standard error: 1.106 on 96 degrees of freedom
## Multiple R-squared:  0.3121, Adjusted R-squared:  0.2906 
## F-statistic: 14.52 on 3 and 96 DF,  p-value: 7.165e-08

This group of very preterms starts around -2.5 SD, followed by a catch-up in child development of approximately 1.0 SD per year. The size of the catch-up is equal for boys and girls.

We may account for the clustering effect by including random intercept and age effects, and rerun as

library(lme4)
## Loading required package: Matrix
lmer(daz ~ 1 + age + sex + sex * age + (1 + age | id), data = md)
## boundary (singular) fit: see help('isSingular')
## Linear mixed model fit by REML ['lmerMod']
## Formula: daz ~ 1 + age + sex + sex * age + (1 + age | id)
##    Data: md
## REML criterion at convergence: 301.9489
## Random effects:
##  Groups   Name        Std.Dev. Corr 
##  id       (Intercept) 0.7702        
##           age         0.3287   -1.00
##  Residual             1.0066        
## Number of obs: 100, groups:  id, 27
## Fixed Effects:
## (Intercept)          age      sexmale  age:sexmale  
##    -2.18642      1.19654      0.02596     -0.09168  
## optimizer (nloptwrap) convergence code: 0 (OK) ; 0 optimizer warnings; 1 lme4 warnings

This analysis yields the same substantive conclusions as before.

References

Deoni, S. “Resilience and Early Brain Development.” Providence, USA.
Fernald, L. C. H., E. Prado, P. Kariger, and A. Raikes. 2017. “A Toolkit for Measuring Early Childhood Development in Low and Middle-Income Countries.” https://documents.worldbank.org/en/publication/documents-reports/documentdetail/384681513101293811/a-toolkit-for-measuring-early-childhood-development-in-low-and-middle-income-countries.
Nelson, C. “Bangladesh Early Adversity Neuroimaging Project.” Bangladesh.